marble flooring – Tiling Tips – Tips and Information About Tiling

Water Damaged Marble Floor Renovated near Wellingborough

19th May 2021 Reese Mackie 0 Comments Earls Barton, executive property, marble cleaning, marble flooring, northampton, Stone Polishing, Water Damage, Water Stains, Wellingborough

I was asked to look at a Polished Marble floor that had been installed in the hallway of an executive property in the Northamptonshire village of Earls Barton and had suffered severe water damage from a burst pipe. Water had penetrated through the ceiling and as the occupants were away at the time two inches of water had flooded the ground floor where it sat for several weeks causing extensive damage and efflorescence to appear in patches all over the floor. The homeowner was extremely worried as this was a very expensive and large Marble floor which was a key feature of the property and didn’t want the disruption of having the tiles lifted and replaced. As you can see from the pictures, there were white etching marks over the surface of the marble ruining the polished appearance and these could not be removed using normal domestic cleaning processes. I wasn’t surprised to find that the owners couldn’t restore the polished appearance of the Marble, as a hard stone like Marble needs to be burnished to build up a polish. I carried out a damp test and cleaned a test area using diamond encrusted burnishing pads, as the floors were still slightly damp I advised the customer to turn on the underfloor heating to assist in drying out the stone for a week, in that time a quote was

300m2 Marble Tiled Floor Cleaned and Polished

22nd March 2017 Reese Mackie 0 Comments cleaning service, cleaning services, floor restoration, marble flooring, marble polishing, marble tiles, Oxshott, palatial home, Sealing, Tile Cleaning, tiled floor

Following on from a referral from a Property Management company I paid a visit it to this palatial property in Oxshott which had approximately 300m2 of Marble tiled flooring that they wanted cleaning and re-polishing, my initial quotation to do this mechanically was too high so I offered an alternative using diamond encrusted burnishing pads which reduced the cost significantly. I didn’t receive an answer so I thought that was the end of it however five months later I got an email asking me to carry out the works. Marble Tiled Floor Polishing This was a very large area so we had two men working with burnishing pads in 10 metre sections. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish. Fortunately there were not many stains and the ones that were there came out quite easily. When we had completed a room using this system we then applied Tile doctor Shine powder which is a crystallising power worked into the floor using a white buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow