Hampshire – Tiling Tips – Tips and Information About Tiling

Commerical Marble Tiled Floor Restoration

20th March 2017 Reese Mackie 0 Comments classic marble floor, cleaning services, Hampshire, marble tile cleaning, marble tiles, Sealing, Tile Cleaning, tile restoration, tiled floor, winchester

Photographs below of a classic black and white Marble floor tile installation at premises in the city of Winchester. As you can see these Marble tiles had seen some traffic and were not in the best of condition following on from some building work that had been going on; fortunately we are quite used to dealing with these problem and have just the right products and equipment to restore them. Marble Tile Cleaning and Polishing For best results on hard stone surfaces such as Marble we burnish the floor using a set of diamond encrusted polishing pads. You start with a coarse pad which applied with a little water to remove surface dirt and sealers etc. before moving through a set of finer polishing pads until you reach a high shine glossy finish. Half way through the burnishing process we stopped to apply a dilution of Tile Doctor Pro-Clean along the grout lines and give them a scrub with stiff hand brushes repeating the process in stubborn areas. After the treatment the floor was washed do to remove any soiled solution before being buffed with a white buffing pad. Any trace of its previous condition was now gone and the floor was uniform in appearance, it took much of the day to do the polishing and a set of four burnishing pads to acquire the right lustre. Source: Mabrle

Marble Tiled Floor Cleaned and Sealed

13th March 2017 Reese Mackie 0 Comments cleaning marble tiles, cleaning services, floor restoration, Hampshire, marble floors, marble tiles, Petersfield, sealing marble tiles, Tile Cleaning, tile maintenance, tiled floor

This polished Marble tiled floor was installed in a house in the old market town of Petersfield. The tile and grout was in good condition but like all polished stone floors they will go dull after a period of time and require burnishing and polishing to restore shine. Cleaning Marble Floor Tiles We gave the floor a quick sweep and wash down with a dilution of Tile Doctor Pro-Clean partly to ensure any surface grit etc. was removed but also so we could get a stiff grout brush in along the grout lines and give them a clean. Once done the floor was rinsed down with water which was removed with a wet vacuum, once done we moved straight onto burnishing the floor to restore the polish. Burnishing requires the application of a little water so there was no need to wait for it to dry. Burnishing requires the application of four different diamond encrusted graded pads in sequence working from coarse which removed old sealers and dirt through to medium, fine and super fine pads which build up the polish on the floor. The floor requires a rinse in-between each pad to remove any slurry and water is extracted from the floor using the wet vacuum, after the super fine pad we removed as much water from the floor as possible and left it to dry overnight ready for sealing the next day.