Riven Slate Patio Left Covered in Grout Smears By Northans Builder Restored
This customer, who lives in Wollaston, a small village in Northamptonshire, called me to look at the unfortunate condition of her Riven Slate tiled patio. She had hired a builder to install it, but he had neglected to remove the grout haze which had occurred quickly enough, allowing it to set. He was subsequently unable to remove the haze because he had already sealed over it. This had left it looking very unsightly, as you can see in the photo below.
The customer initially contacted me back in December 2016. At that time, I did explain to the customer that the Winter wouldn’t be an ideal time to restore the patio, and that it would be best to carry out the work in the Spring. However, she was so unhappy with the appearance of the patio and – knowing she had guests coming over for Christmas – wanted something to be done to improve the condition of the tiles as soon as possible.
It was agreed that I would immediately carry out the removal of the old sealer and the grout haze beneath, but leave the re-sealing until the Spring of the following year when the weather was dry. The customer understood that when I returned in the Spring, the patio would require another light clean and brush to prepare it for sealing.
To put the customer’s mind at rest somewhat, I carried out a test clean on one slab of the patio using Tile Doctor impregnating, colour intensifying sealer, known as Colour Grow. This darkened the tile and provided a natural look finish, which was preferred by the customer. I also returned to the property several days later to carry out a water repellency test, but as you can see from the photo below, the rain beat me to it. Thankfully, the repellency test had positive results.
I was then able to begin the cleaning process.
Cleaning and Sealing a Riven Slate Tiled Patio
To begin, I removed the old sealer using a strong mix of Tile Doctor Remove & Go, which is a stripper and cleaner. This product was scrubbed into the tiles with a rotary brush machine. Net, I rinsed away the resulting slurry and soaked up the water with a wet vax machine.
This initial clean exposed the true extent of the grout haze – it was over all every tile! My next course of action was therefore to remove this using Tile Doctor Acid Gel, which is a gel cleaner specially formulated to neutralise grout haze. This was allowed to dwell for a short period before I brushed it in.
Following this, I gave the whole area a second brush with a small amount of water, before using a wet vax machine once again to make sure all cleaning chemicals were removed. I used the customer’s hosepipe to rinse down the entire patio as there was good drainage.
I allowed the tiles to dry out naturally, before waited for a dry day in April this year to return to the property. During this day, I sealed the entire area with Tile Doctor Colour Grow sealer to really deepen the colour in the stone and provide the whole patio long-lasting protection against the elements.
The customer was exceptionally happy to have the patio restored to perfect condition. I’m sure she’ll make great use of it over the Summer!
