Restoring Painted Quarry Tiles in a Surrey Vicarage
A Vicar from Cranleigh contacted me earlier this year about a Quarry tiled floor. It turns out he had lifted the carpets in the hallway of the Vicarage and found that the previous tenant had painted red tile paint around the tiles up to the edges of the carpet. With the carpet removed the floor looked very unattractive and he was looking to have the original appearance of the Quarry tiles restored.
I went to Cranleigh to survey the problem and you can see from the pictures the floor wasn’t looking great, the paint looked as if it had been applied without any preparation and had peeled off in places. I discussed my plan to renovate the floor with the Vicar which would involve stripping all the paint off the tiles followed by deep cleaning and then applying a sealer. He was very pleased to hear this and was happy with the quote that I produced which would take two days. We arranged a time to return the following month to complete the work.
Stripping Paint from a Quarry Tiled Hallway Floor
On day one I started by protecting the skirting and other woodwork with decorative tape. Once this was done, I spent time removing the paint with paint stripper and a sharp blade. It was messy and tedious work but necessary to achieve the requested result. The waste was then rinsed off the floor with water and extracted using a wet vacuum.
Once all the paint was removed, I cleaned the tiles with a coarse 400-grit diamond encrusted burnishing pad fitted to a rotary machine and lubricated with water. This was followed with an 800-grit pad. The former opens the tiles pores allowing dirt to be extracted and the 800-grit pad closes them ready for sealing. Quarry tiles are particularly porous, so I left the floor to dry off for 48 hours days before returning to seal the tiles.
Sealing a Quarry Tiled Hallway Floor
Returning a few days later I started with tidying up any areas that needed further attention. The floor had dried out nicely however I wanted it to be clear of any dirt or dust since I cleaned it so I gave it a light mop and left the floor to dry off again. Once the floor was completely dry, I sealed the area with several coats of Tile Doctor Seal and Go Extra.
I selected this product as it is a super tough sealer that once applied has a sheen effect while offering a very strong protective surface to the floor. This was important as hallways receive a high level of foot traffic and even more so in a Vicarage with parishioners coming and going. Seal and Go Extra is also breathable and this is an important consideration when choosing a sealer for use on old tiled floors that don’t have damp proof membrane installed.
The vicar was very pleased with the finished floor, I discussed with him the best way to keep it clean and maintained would be to use Tile Doctor Neutral Tile Cleaner, which is pH neutral and so won’t prematurely degrade the integrity of the sealer like stronger products.
Source: Quarry Tile Cleaning and Renovation Service in Surrey