Repair and Restoration of a Victorian Tiled Hallway in Great Paxton, Cambridgeshire
I was called out to a house in the Village of Great Paxton to quote for deep cleaning a sealing a Victorian tiled hallway floor, there was also a triangular cemented section at the bottom of the stairs that the owner wanted retiling to match.
 |
 |
Fortunately, the owner had discovered some spare tiles in the under-stair cupboard that would do the job; were not sure why this triangular section had been cemented in at some point in the past, but I was happy that the spare tiles would be enough to cover. My quote was accepted, and it wasn’t long before I was able to return to carry out the renovation.
Repairing a Victorian Tiled Hallway Floor
I started by taping up the skirting boars and other woodwork with protective tape. Once that was done I removed the triangular section of cement at the foot of the stairs. I noticed that the sub floor consisted of rubble and sand so once removed I was able to lay a section of a damp prof membrane and then back filled with self-levelling compound.
Once the levelling compound had dried I laid the tiles that the owner had found under the stairs continuing the black and red diamond pattern. I used a quick setting adhesive which enabled me to grout the tiles in before leaving for the day and leave it to set overnight.
Deep Cleaning a Victorian Tiled Hallway Floor
Day two was begun by inspecting the previous day’s work to make sure all was well with the tiling and then continuing the restoration of the floor. In general, the tiles were dirty and had white paint splashed from decorating and so were now looking dull and faded. To remove the ingrained dirt, I gave the tiles a soak in a medium dilution of Tile Doctor Remove and Go which was scrubbed in using a black scrubbing pad fitted to a rotary floor buffer. This process did a good job of removing the dirt and softened the paint splashes which I was then able to carefully scrape off.
After rinsing the floor with water and extracting the soil with a wet vacuum I could see the tiles were much cleaner but needed more work to get the replacement section to blend better with the existing. To resolve this, I honed the surface of the tiles with a 100-grit and then 200-grit pad rinsing with water and extracting after each pad.
Sealing Victorian Hallway Tiles
The floor was left to dry off fully overnight and I returned the next day to apply a sealer that would add colour and protect the tiles going forward. Multiple coats of Tile Doctor Seal and Go were applied which a water-based product that adds a nice subtle sheen to the floor which works well on Victorian Tiles and put new life into the tiles.
 |
 |
My customer was very happy with the transformation and left the following feedback.
“We are very pleased with the restoration of our Victorian tiles in the hallway. We are also very pleased with the service and quality of the works carried out.”
Source: Victorian Tile Repair and Restoration Service in Great Paxton, Cambridgeshire