Refreshing a Marble Tiled Kitchen
This Polished Marble floor had been installed in the kitchen of a house near Leicester, it had been some time since its last deep clean and re-polish so the tiles had started to look dull and lifeless.
Stripping the Marble Tiled Floor
To resolve the floor was cleaned using a dilution of Tile Doctor Remove and Go worked in using a scrubbing pad to remove any remaining sealer and dirt especially along the grout lines. Once this was done the floor was burnished using a set of Tile Doctor burnishing pads which strip the Marble back and then re-builds the polish. These diamond encrusted pads come in a number of different grades and each one does a different job from scrubbing to polishing. I started with the coarse pad together with a little water and this does the job of stripping back the surface of the floor. I then moved onto the finer grades which do the job of building the surface polish to a nice shine.
Sealing the Marble Floor
The next morning I arrived to find the floor had dried out enough for me to seal it which was done using a couple of coats of Tile Doctor Ultra Seal which is an impregnating sealer that provides a natural look and is recommended for use in food preparation area.
Once it was finished the floor took on a new lease of life and the deep shine has been restored.
Source: Stone Floor Cleaning and Polishing in Leicestershire