Achieving a Deep Shine on Polished Limestone Tiles in Boxworth, Cambridgeshire
I was asked to visit a house in Boxworth Cambridge to survey a large Limestone tiled kitchen, dining room, utility and hallway. The customer was not happy with the finish of the tiles and wanted it to have more lustre. Additionally, the floor had suffered some damage in the dining room where the floor had been scratched by table and chair legs.
 |
 |
Boxworth is a small village of around 100 houses, this property being one of the larger ones. The village lies around eight miles to the north west of Cambridge. I examined the floor and discussed with the client the process we would use. Although not looking their best, I could see that the Limestone tiles contained a variety of natural colour shades which with the right treatment could be made to really come to life. I presented a quote which they were happy to accept.
 |
 |
Cleaning a Limestone Tiled Kitchen and Hallway Floor
My first job was the protect all the surrounding areas from splashing during the cleaning process. To do this I removed the kickboards from underneath some of the kitchen units, elsewhere was covered with a blue protective film.
To start the cleaning, I first applied a dilution of Tile Doctor Remove and Go to the floor and then worked it in using a black scrubbing pad fitted to a rotary machine. I also scrubbed the grout by hand as the pads can struggle to reach into the recessed grout line. After rinsing the floor with water, the soiled solution was then extracted off the floor using a wet vacuum.
 |
 |
I followed up this process with the application of a set of Diamond burnishing pads starting with the coarse 400-grit pad, then medium 800-grit pad, fine 1500-grit pad and finishing with the extra fine 3000-grit pad. The pads are fitted to a rotary floor buffer and are run over each tile using water for lubrication. All the slurry produced by the cleaning pads is removed away using our truck mounted hot water extraction machine to cause minimum mess to the client.
The floor was left to dry off overnight and I would return the next day to finish the polishing process.
Sealing a Limestone Tiled Kitchen and Hallway Floor
On the following day, we checked the floor was completely dry and then using a white buffing pad ground Tile Doctor Shine Powder into the Limestone floor. The powder builds up a deep and durable polish on the tiles leaving a deep and resilient lustre.
 |
 |
To further protect the stone and enhance the natural colours in the Limestone a couple of coats of Tile Doctor Colour Grow impregnating sealer were applied followed by a light buff with a red pad. The sealant is an impregnator that seeps into the pores of the stone protecting it from within and intensifying the natural colours in the stone.
When finished the floor looked great. We had managed to remove the scratches from the dining area and the floor now had the lustre that the client had been hoping for.
The client was extremely happy with the outcome and gave the following feedback:
“Quoted very quickly, carried out the work quickly and efficiently with no fuss.”
 |
 |
Source: Limestone Tile Cleaning and Polishing Service in Boxworth, Cambridgeshire